One Day Workshop on Embedded Systems Architecture and ARM Processor - Hands On
2023-09-10 08:30 - 2023-09-16 16:30 (Asia/Kolkata) | Surat International Exhibition & Convention Centre, Surat, India, Surat International Exhibition & Convention Centre, Surat, Gujarat, India
Knots materially affect cracking and warping, ease in working, and cleavability of timber. They are defects which weaken timber and lower its value for structural purposes where strength is an important consideration. The weakening effect is much more serious when timber is subjected to forces perpendicular to the grain and/or tension than when under load along the grain and/or compression. The extent to which knots affect the strength of a beam depends upon their position, size, number, and condition. A knot on the upper side is compressed, while one on the lower side is subjected to tension. If there is a season check in the knot, as is often the case, it will offer little resistance to this tensile stress. Small knots may be located along the neutral plane of a beam and increase the strength by preventing longitudinal shearing. Knots in a board or plank are least injurious when they extend through it at right angles to its broadest surface. Knots which occur near the ends of a beam do not weaken it. Sound knots which occur in the central portion one-fourth the height of the beam from either edge are not serious defects. Knots materially affect cracking and warping, ease in working, and cleavability of timber. They are defects which weaken timber and lower its value for structural purposes where strength is an important consideration. The weakening effect is much more serious when timber is subjected to forces perpendicular to the grain and/or tension than when under load along the grain and/or compression. The extent to which knots affect the strength of a beam depends upon their position, size, number, and condition. A knot on the upper side is compressed, while one on the lower side is subjected to tension. If there is a season check in the knot, as is often the case, it will offer little resistance to this tensile stress. Small knots may be located along the neutral plane of a beam and increase the strength by preventing longitudinal shearing. Knots in a board or plank are least injurious when they extend through it at right angles to its broadest surface. Knots which occur near the ends of a beam do not weaken it. Sound knots which occur in the central portion one-fourth the height of the beam from either edge are not serious defects.

Knots materially affect cracking and warping, ease in working, and cleavability of timber.
They are defects which weaken timber and lower its value for structural purposes where strength is an important consideration.
The weakening effect is much more serious when timber is subjected to forces perpendicular to the grain and/or tension than when under load along the grain and/or compression.
The extent to which knots affect the strength of a beam depends upon their position, size, number, and condition.
A knot on the upper side is compressed, while one on the lower side is subjected to tension.
If there is a season check in the knot, as is often the case, it will offer little resistance to this tensile stress.
Small knots may be located along the neutral plane of a beam and increase the strength by preventing longitudinal shearing.
Knots in a board or plank are least injurious when they extend through it at right angles to its broadest surface.
Knots which occur near the ends of a beam do not weaken it.
Sound knots which occur in the central portion one-fourth the height of the beam from either edge are not serious defects.

Knots materially affect cracking and warping, ease in working, and cleavability of timber. They are defects which weaken timber and lower its value for structural purposes where strength is an important consideration.

DUMMY CONTENT

Bengaluru Realty Investment Expo (SBI Expo)
2023-09-10 09:00 - 2023-09-12 18:30 | BIEC Bengaluru International Exhibition Centre, Bengaluru, India, BIEC Bengaluru International Exhibition Centre, Bengaluru, Karnataka
Ninja Forms is a 100% beginner friendly WordPress form builder, appropriate for complete beginners all the way to seasoned WordPress developers. We don’t just say it, we stand by it. Our support team is standing by to help you realize your site’s potential anywhere your forms are concerned. Ninja Forms is a 100% beginner friendly WordPress form builder, appropriate for complete beginners all the way to seasoned WordPress developers. We don’t just say it, we stand by it. Our support team is standing by to help you realize your site’s potential anywhere your forms are concerned.Ninja Forms is a 100% beginner friendly WordPress form builder, appropriate for complete beginners all the way to seasoned WordPress developers. We don’t just say it, we stand by it. Our support team is standing by to help you realize your site’s potential anywhere your forms are concerned. Ninja Forms is a 100% beginner friendly WordPress form builder, appropriate for complete beginners all the way to seasoned WordPress developers. We don’t just say it, we stand by it. Our support team is standing by to help you realize your site’s potential anywhere your forms are concerned. Ninja Forms is a 100% beginner friendly WordPress form builder, appropriate for complete beginners all the way to seasoned WordPress developers. We don’t just say it, we stand by it. Our support team is standing by to help you realize your site’s potential anywhere your forms are concerned.
DUMMY CONTENT

Session on Green and Sustainable Practices in Commercial Buildings and Industries Trivandrum
2023-09-10 10:00 - 18:00 | Pragati Maidan, New Delhi, India, New Delhi, India, Kerala, 562123, India
Knots materially affect cracking and warping, ease in working, and cleavability of timber. They are defects which weaken timber and lower its value for structural purposes where strength is an important consideration. The weakening effect is much more serious when timber is subjected to forces perpendicular to the grain and/or tension than when under load along the grain and/or compression. The extent to which knots affect the strength of a beam depends upon their position, size, number, and condition. A knot on the upper side is compressed, while one on the lower side is subjected to tension. If there is a season check in the knot, as is often the case, it will offer little resistance to this tensile stress. Small knots may be located along the neutral plane of a beam and increase the strength by preventing longitudinal shearing. Knots in a board or plank are least injurious when they extend through it at right angles to its broadest surface. Knots which occur near the ends of a beam do not weaken it. Sound knots which occur in the central portion one-fourth the height of the beam from either edge are not serious defects.
Knots materially affect cracking and warping, ease in working, and cleavability of timber. They are defects which weaken timber and lower its value for structural purposes where strength is an important consideration. The weakening effect is much more serious when timber is subjected to forces perpendicular to the grain and/or tension than when under load along the grain and/or compression. The extent to which knots affect the strength of a beam depends upon their position, size, number, and condition. A knot on the upper side is compressed, while one on the lower side is subjected to tension. If there is a season check in the knot, as is often the case, it will offer little resistance to this tensile stress. Small knots may be located along the neutral plane of a beam and increase the strength by preventing longitudinal shearing. Knots in a board or plank are least injurious when they extend through it at right angles to its broadest surface. Knots which occur near the ends of a beam do not weaken it. Sound knots which occur in the central portion one-fourth the height of the beam from either edge are not serious defects.

DUMMY CONTENT

Global Virtual Conference in Civil Engineering 2023
2023-09-10 10:00 - 18:00 | Le Meridien, New Delhi, India, New Delhi, India, Delhi, 110008, India
Civil engineers are always in a state of worry because they aren’t able to meet with prominent professionals in their field and gain new expertise that could benefit their careers tremendously. This is largely due to the fact that there are almost no avenues or possibilities (other than participating in an international conference in civil engineering in 2023) for civil engineers and civil engineering students to take advantage of. And when it comes to taking advantage of such opportunities that are available at civil engineering conferences, most conferences disappoint because they are low-quality events that aren’t planned or organized well.
If you are someone who is desperate to take part in a world-class civil engineering conference in 2023 that is set to take place in the coming months, you need to subscribe to our conference alerts. Why? Because, you’ll find that you are amongst the first to find out about and register for such high-level events that are so difficult to register for, and highly sought after.
DUMMY CONTENT

6th International Symposium on Pavement, Roadway, and Bridge Life Cycle Assessment
2023-09-10 10:00 - 18:30 | Chennai Trade Centre, Chennai, India, Chennai trade centre, Chennai, Tamil Nadu, India

DOORS AND WINDOWS
2023-09-10 10:00 - 2023-09-13 19:00 | Chennai Trade Centre, Chennai, India, Chennai trade centre, Chennai, Tamil Nadu, India
Fenesta offers vast range of windows & doors designs for the home and office that are sure to add grace to your space. We have an exotic range of high-quality uPVC and aluminium windows & doors and Solid Panel Doors that have been designed to enhance the aesthetics and to protect your home from the harsh elements of the world outside. Fenesta offers vast range of windows & doors designs for the home and office that are sure to add grace to your space. We have an exotic range of high-quality uPVC and aluminium windows & doors and Solid Panel Doors that have been designed to enhance the aesthetics and to protect your home from the harsh elements of the world outside. Fenesta offers vast range of windows & doors designs for the home and office that are sure to add grace to your space. We have an exotic range of high-quality uPVC and aluminium windows & doors and Solid Panel Doors that have been designed to enhance the aesthetics and to protect your home from the harsh elements of the world outside.

Fenesta offers vast range of windows & doors designs for the home and office that are sure to add grace to your space. We have an exotic range of high-quality uPVC and aluminium windows & doors and Solid Panel Doors that have been designed to enhance the aesthetics and to protect your home from the harsh elements of the world outside. Fenesta offers vast range of windows & doors designs for the home and office that are sure to add grace to your space. We have an exotic range of high-quality uPVC and aluminium windows & doors and Solid Panel Doors that have been designed to enhance the aesthetics and to protect your home from the harsh elements of the world outside.

DUMMY CONTENT

Festival of Architecture and Interior Designing - Mumbai (FOAID-Mumbai)
2023-09-10 10:00 - 2023-09-14 19:00 | Auroville Consulting, Tamil Nadu, India, Auroville Consulting, Chennai, Tamil Nadu, India
DUMMY CONTENT

The Fifth International Conference on Building, Construction, and Environmental Engineering
2023-09-11 08:00 - 2023-09-13 17:00 | Surat International Exhibition & Convention Centre, Surat, India, Surat International Exhibition & Convention Centre, Surat, Gujarat, India

WOFX World Furniture Expo
2023-09-12 08:00 - 2023-09-17 17:00 | NSIC Exhibition Complex, New Delhi, India, NSIC Exhibition Complex, New Delhi, Delhi, India
Wood is a structural tissue found in the stems and roots of trees and other woody plants. It is an organic material – a natural composite of cellulose fibers that are strong in tension and embedded in a matrix of lignin that resists compression. Wood is sometimes defined as only the secondary xylem in the stems of trees,[1] or it is defined more broadly to include the same type of tissue elsewhere such as in the roots of trees or shrubs.[citation needed] In a living tree it performs a support function, enabling woody plants to grow large or to stand up by themselves. It also conveys water and nutrients between the leaves, other growing tissues, and the roots. Wood may also refer to other plant materials with comparable properties, and to material engineered from wood, or woodchips or fiber.
Wood has been used for thousands of years for fuel, as a construction material, for making tools and weapons, furniture and paper. More recently it emerged as a feedstock for the production of purified cellulose and its derivatives, such as cellophane and cellulose acetate.
As of 2020, the growing stock of forests worldwide was about 557 billion cubic meters.[2] As an abundant, carbon-neutra renewable resource, woody materials have been of intense interest as a source of renewable energy. In 2008, approximately 3.97 billion cubic meters of wood were harvested.[2] Dominant uses were for furniture and building construction.

Las Vegas, USA – June 16, 2016: The melting building facade of the Lou Ruvo Center for Brain Health near Las Vegas, Nevada

India Design Summit
2023-09-20 08:00 - 2023-09-21 17:00 | Science city, Kolkata, India, Science city, Kolkata, West Bengal, India
If there are differences within a growth ring, then the part of a growth ring nearest the center of the tree, and formed early in the growing season when growth is rapid, is usually composed of wider elements. It is usually lighter in color than that near the outer portion of the ring, and is known as earlywood or springwood. The outer portion formed later in the season is then known as the latewood or summerwood.[9] There are major differences, depending on the kind of wood. If a tree grows all its life in the open and the conditions of soil and site remain unchanged, it will make its most rapid growth in youth, and gradually decline. The annual rings of growth are for many years quite wide, but later they become narrower and narrower. Since each succeeding ring is laid down on the outside of the wood previously formed, it follows that unless a tree materially increases its production of wood from year to year, the rings must necessarily become thinner as the trunk gets wider. As a tree reaches maturity its crown becomes more open and the annual wood production is lessened, thereby reducing still more the width of the growth rings. In the case of forest-grown trees so much depends upon the competition of the trees in their struggle for light and nourishment that periods of rapid and slow growth may alternate. Some trees, such as southern oaks, maintain the same width of ring for hundreds of years. On the whole, as a tree gets larger in diameter the width of the growth rings decreases.

If there are differences within a growth ring, then the part of a growth ring nearest the center of the tree, and formed early in the growing season when growth is rapid, is usually composed of wider elements.
It is usually lighter in color than that near the outer portion of the ring, and is known as earlywood or springwood. The outer portion formed later in the season is then known as the latewood or summerwood.[9]
There are major differences, depending on the kind of wood. If a tree grows all its life in the open and the conditions of soil and site remain unchanged, it will make its most rapid growth in youth, and gradually decline.
The annual rings of growth are for many years quite wide, but later they become narrower and narrower. Since each succeeding ring is laid down on the outside of the wood previously formed, it follows that unless a tree materially increases its production of wood from year to year, the rings must necessarily become thinner as the trunk gets wider.
As a tree reaches maturity its crown becomes more open and the annual wood production is lessened, thereby reducing still more the width of the growth rings.
In the case of forest-grown trees so much depends upon the competition of the trees in their struggle for light and nourishment that periods of rapid and slow growth may alternate. Some trees, such as southern oaks, maintain the same width of ring for hundreds of years.
On the whole, as a tree gets larger in diameter the width of the growth rings decreases.

NEWS RELATED PIC

If there are differences within a growth ring, then the part of a growth ring nearest the center of the tree, and formed early in the growing season when growth is rapid, is usually composed of wider elements.
It is usually lighter in color than that near the outer portion of the ring, and is known as earlywood or springwood. The outer portion formed later in the season is then known as the latewood or summerwood.[9]
There are major differences, depending on the kind of wood. If a tree grows all its life in the open and the conditions of soil and site remain unchanged, it will make its most rapid growth in youth, and gradually decline. The annual rings of growth are for many years quite wide, but later they become narrower and narrower.
Since each succeeding ring is laid down on the outside of the wood previously formed, it follows that unless a tree materially increases its production of wood from year to year, the rings must necessarily become thinner as the trunk gets wider.
As a tree reaches maturity its crown becomes more open and the annual wood production is lessened, thereby reducing still more the width of the growth rings.
In the case of forest-grown trees so much depends upon the competition of the trees in their struggle for light and nourishment that periods of rapid and slow growth may alternate. Some trees, such as southern oaks, maintain the same width of ring for hundreds of years.
On the whole, as a tree gets larger in diameter the width of the growth rings decreases.

Before building your event website, you have to hammer out the details. Think about what you hope to achieve with your event.
If there are differences within a growth ring, then the part of a growth ring nearest the center of the tree, and formed early in the growing season when growth is rapid, is usually composed of wider elements. It is usually lighter in color than that near the outer portion of the ring, and is known as earlywood or springwood. The outer portion formed later in the season is then known as the latewood or summerwood.[9] There are major differences, depending on the kind of wood. If a tree grows all its life in the open and the conditions of soil and site remain unchanged, it will make its most rapid growth in youth, and gradually decline. The annual rings of growth are for many years quite wide, but later they become narrower and narrower. Since each succeeding ring is laid down on the outside of the wood previously formed, it follows that unless a tree materially increases its production of wood from year to year, the rings must necessarily become thinner as the trunk gets wider. As a tree reaches maturity its crown becomes more open and the annual wood production is lessened, thereby reducing still more the width of the growth rings. In the case of forest-grown trees so much depends upon the competition of the trees in their struggle for light and nourishment that periods of rapid and slow growth may alternate. Some trees, such as southern oaks, maintain the same width of ring for hundreds of years. On the whole, as a tree gets larger in diameter the width of the growth rings decreases.

IEEE International Conference on Software Architecture (ICSA)
2023-09-25 09:00 - 2023-09-27 19:00 | Science city, Kolkata, India, Science city, Kolkata, West Bengal, India
ACCEPT PAYMENTS AND DONATIONS WITH A PAYMENT FORM OR DONATION FORM
You can accept PayPal and credit card payments securely and easily from any of your WordPress forms. Single payments or subscriptions, fixed, variable, or user entered amounts. Give your customers or donors all the options, or just one with a PayPal form, Stripe form, and more!
GET MORE FROM YOUR SIGNUP FORMS AND LEAD GENERATION FORMS
Experience the difference a fully customizable email subscription form or lead generation form will make for your business. Grow your mailing lists and bring in new leads like never before. Complete integration with MailChimp, Constant Contact, Campaign Monitor, Salesforce CRM, Zoho CRM, Insightly CRM, and more!

TUBE & PIPE FAIR 2023
2023-10-06 10:00 - 2023-10-08 18:00 | Pragati Maidan, New Delhi, India, New Delhi, India, Kerala, 562123, India

POULTRY INDIA 2023
2023-11-22 10:00 - 2023-11-24 18:00 | HITEX Exhibition Complex, Hyderabad, Telangana, India
Poultry India, an international exhibition for the poultry industry just concluded the 14th Edition at Hitex Exhibition Centre, Hyderabad, Telangana, India & Knowledge Day Technical Seminal at Novotel, Hitech City, Hyderabad, Telangana. The Exhibition features the most innovative and reputed companies across the continent from the poultry sector to showcase their businesses and interact with potential partners, clients and investors. This event provides valuable information about poultry industry, poultry feeds, poultry equipment’s, technology, chicken breeders, Egg farming, poultry nutrition, animal health and international poultry production. It also offers latest advances in poultry research, science and technology like cages and feed milling importance.

ABI Expo 2024, Chennai
2024-07-26 - 2024-07-28 | Chennai Trade Centre, Chennai, India, Chennai trade centre, Chennai, Tamil Nadu, India
ABI Expo 2024 will be held at the Chennai Trade Centre, Chennai on 26, 27 and 28 July 2024.
ABI Expo 2024 Chennai

International Aqua Show
2024-10-22 08:00 - 2024-10-31 17:00 | Bombay Exhibition Centre, Mumbai
test event 1 blka ha basbsahd oiuwefhdp9qwe p98yweq 9ije[poir
we]p e[wn[rpoiu r[qwpeor
]p[qe]r[o [[oijr [ewpokr
][wer] ewproj poejpwr

MumbaiWood 2024
2024-10-27 08:00 - 2024-10-29 17:00 | Bombay Exhibition Centre, Mumbai
MumbaiWood 2024 is the platform that brings all stakeholders in the wood industry

ACETECH MUMBAI 2025
2025-11-06 - 2025-11-09 | Bombay Exhibition Centre, Mumbai
The 2025 Mumbai Edition of ACETECH will be held from 6th to 9th November 2025 at Bombay Exhibition Centre, Goregaon (East), Mumbai.
The event’s website is www.acetechexpo.com
ACETECH Mumbai has, over the past few years, earned the reputation as one of Asia’s largest and most prestigious trade exhibitions focused on Architecture, Construction and Engineering.
The various segments of exhibitors in ACETECH Mumbai include:
• Air Conditioning & Refrigeration
• Bath & Sanitation
• Doors & Windows
• Decorative Lighting
• Electrical Wires & Cables
• Elevators & Escalators
• Glass Glazing & Facades
• Home & Office Automation
• Hardware & Fittings
• International Cucine & Kitchen Technologies
• International Furniture
• Landscape
• Natural & Engineered Marble & Stones
• Paints, Coats & Wall Coverings
• Plumbing Pipes & Fittings
• Roofing & Cladding
• Safety, Security & Fire Protection
• Steel & Concrete
• Switches & Switchgear
• Tiles & Ceramics
• Wood, Veneer & Floorings
• Water Technologies
ACETECH Mumbai is a must visit exhibition for the following group of people:
• Architects
• Interior Designers
• Landscape Designers
• Contractors
• Builders and Real Estate Developers
• Structural & MEP Engineers
• Electricians, Plumbers, Masons, Carpenters, and other construction industry professionals/workers
• Manufacturers, Distributors, and Channel Partners
For visitor registration, visit www.acetechexpo.com/acetech-visitor-registration/
For exhibiting in the exhibition, visit https://acetechexpo.com/exhibit-enquiry-form/

FOAID Mumbai 2025
2025-12-19 - 2025-12-20 | Jio World Convention Centre Mumbai, Mumbai, India
Festival of Architecture and Interior Designing – Mumbai 2025

ABI Expo 2025 Chennai
2025-12-26 - 2025-12-28 | Chennai Trade Centre, Chennai, India, Chennai trade centre, Chennai, Tamil Nadu, India
